#01400
#01401
Replacement
Blades
(5 per pack)
|
|
MULTI-PURPOSE
PLANE
|
The
Multi-Purpose Plane was designed
to
offer several different planes in
one tool. Such as: Surface Plane,
Rabbet Plane - to make grooves and
go into edges, Bull Nose Plane,
Radial
Plane and Special Planes for all
types of plastic and formica. Additional
functions are linoleum cutter and
scraper. The greatest advantage
of
the Multi-Purpose Plane is that it
uses special interchangeable ice
hardened
industrial blades - thus eliminating
the need to resharpen. The plane
operates
at a 27 degree angle which provides
a clean cut in materials like plywood,
balsa, polystyrene, etc.
|
|
APPLICATIONS
|
|
To
set blade: Remove wing nut & plate.
Insert blade. Replace Plate with "V"
groove to the rear. Adjust the table
location & secure wing nut.
|
|
Surface
Plane:
Set blade in center of the plane.
|
|
Radial
Plane:
Place blade in rear of plane. Works for
right or left handed users. CAUTION! Immediately
Remove Blade After use! |
|
Rabbet
Plane:
Set blade to left or right of center
depending on
groove needs.
|
Linoleum
Cutter:
Place the blade in the front of the plane.
Angle blade with outside edge as high
point & opposite end flush or below
plane body. |
|
Bull
Nose Plane:
Move blade and plane from center to
the front of the plane to allow free
movement to surface edge.
|
Scraper:
Extend blade out beyond plane edge. Maintain
parallel edge. Using dull side of a second
blade, carefully sweep it back and forth
across the top of the blade 5 or 6 times
under medium pressure. This action will
bend the sharp edge down to facilitate
its use as a scraper. |
Special
planes for all types of Plastic &
Formica
Use a bent blade with its bent side down,
in the center plane opening. Adjust and
tighten wing nut. Bent edge acts as a
file, thus enabling usage on formica,
plexiglass, etc. |
TOP
|
